Use CrossBeam from Claude, ChatGPT or Copilot

How do I fix my plans with Claude using my PreCheck brief?

Where: On your PreCheck results, open Fix your plans with Claude, copy the prompt, and paste it into Claude

How do I fix my plans with Claude using my PreCheck brief?

Quick answer: On your PreCheck results, open Fix your plans with Claude and copy the prompt. Paste it into Claude with CrossBeam connected. Claude opens your brief, tells you where to start, and works through each fix with you: which sheet, what note to draw, and the code it cites. When the set is revised, you upload it on the results page for a re-check.

Steps

  1. Open your finished PreCheck. If it has Your brief, find the Fix your plans with Claude panel. Only PreChecks run through a city's PreCheck program have a brief.
  2. Copy the prompt. It holds a private link to this one brief, so share it only with people working on these plans. You can turn it off from the same panel.
  3. Paste it into Claude. If CrossBeam is not connected yet, Claude asks you to connect it first. See Connect CrossBeam to Claude.
  4. Claude reads the opening and starts with the first comment. For each step it names the sheet, the note to draw and the citation. Steps for your engineer or energy consultant are grouped so you can send them one list.
  5. Ask Claude to look at a sheet or mark it up: "Show me A-02 and cloud where the hose route goes." Your marks are saved with the project as a numbered redline set.
  6. When the drawings are revised, upload the new set from your results page with Re-check your revised plans. See Re-check revised plans. Only the re-check decides what is fixed.

Good to know

  • Approvals other offices own, such as a Planning stamp or an asbestos survey, show up as reminders. They are not drawing fixes and do not count toward FastPass.
  • Steps the re-check grades count toward a FastPass certificate.
  • Checking a box in Claude or on the results page is your own note. It does not clear a comment.
  • A PreCheck without a brief still works with Claude: see Go over your review results with Claude.

Related

From an AI assistantfor Claude and other assistants connected to CrossBeam
  1. crossbeam_get_brief with brief_token (from the panel's prompt, starts with cbb_) or project_id (the owner only). Read opening to the person.
  2. Every entry in comments is work left; state says only where it came from (still_open, new, or null on round one). What the last round cleared is in cleared.
  3. For each step, draw plan.notes on the named sheet_id with its cite, and add any new_sheet. packet: true steps go to the named professional as one list. graded: true steps count toward fastpass.
  4. For drawing, install the kit with crossbeam_get_skill (skill_id: "permit-drawings") and get values from crossbeam_rules (pass the project's city). Code questions go to crossbeam_ask. A value you cannot confirm stays a placeholder.
  5. crossbeam_get_sheet_image and crossbeam_save_redlines take brief_token in place of project_id.
  6. There is no upload tool. The applicant uploads the revised set at project.results_url; that starts the re-check.

Watch for:

  • no_brief means this project has none: offer its findings (crossbeam_get_findings). brief_not_found means the token was turned off or expired; ask for a fresh prompt from the panel.
  • Only a PreCheck has a brief. On a city review, offer the findings and corrections letter.
  • Follow the brief's own how_to_work and how_to_resubmit. Never say a fix is done: say what changed in the drawings; the re-check grades it.
  • In a text host the marked sheets are listed in sheet_images without links; call crossbeam_get_sheet_image to look at one.

Related

How do I fix my plans with Claude using my PreCheck brief? · CrossBeam Permits Help